DETAILS
Features
- AC polarity welding
- Performs on low amperages and OCV
- Easy to strike arc
Typical Applications
- Small AC welders
- Sheet metal
- Edge, corner and butt joints
Welding Positions
- All
Shielding Gas
- Not Applicable
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6011 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6011 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 450-520 (65-75) | 560-630 (82-92) | 22-30 | 38-96 (28-71) | 85-92 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6011 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.15-0.20 | 0.02-0.05 | 0.60-0.71 | 0.01 max. | 0.03 max. | 0.004-0.013 | 0.004-0.009 | 0.35-0.60 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | AC | 40-90 |
| 3/32 in (2.4 mm) | DC± | 40-80 |
| 1/8 in (3.2 mm) | AC | 65-120 |
| 1/8 in (3.2 mm) | DC± | 60-110 |
| 5/32 in (4.0 mm) | AC | 115-150 |
| 5/32 in (4.0 mm) | DC± | 105-135 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |