Menu Close
Excalibur Stick Electrode

Diameters / Packaging

Diameters
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED038110
3/32 x 14 in (2.4 x 350 mm) ED031732
5/32 x 14 in (4.0 x 350 mm) ED031738

Lincoln® 7018 AC

Stick (SMAW)

CLASSIFICATIONS:
E7018 H8

Mild Steel, Low Hydrogen • AWS E7018 H8

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • 50 lb Easy Open Can
Buy Now

DETAILS

Features

  • capable of cold re-strike
  • Low open circuit voltage operation
  • Minimal spatter

Typical Applications

  • General fabrication
  • Tack and skip welds
  • Thin section

Welding Positions

  • All except vertical down

Shielding Gas

  • Not Applicable

Special Features

  • AC polarity welding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Lincoln® 7018 AC-RSP

ED031738
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
Red Line Premium Leather MIG Stick Welding Gloves

Premium Leather MIG Stick Welding Gloves - Large

K2980-L
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018, E7018-H8
CWB CSA W48 E4918-H8

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E7018-H8 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-580 (66-84) 550-660 (79-95) 22-34 27-136 (20-100) 85-95

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7018-H8 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 8 max. 0.6 max.
Typical Result 0.04-0.08 0.02-0.04 0.93-1.59 0.02 max. 0.01-0.03 0.011-0.019 0.005-0.016 0.28-0.46 0.02-0.03 1.00-1.67 3-7 0.2 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) AC 75-120
3/32 in (2.4 mm) DC+ 70-115
1/8 in (3.2 mm) AC 105-150
1/8 in (3.2 mm) DC+ 100-140
5/32 in (4.0 mm) AC 130-200
5/32 in (4.0 mm) DC+ 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.