Menu Close
Submerged Arc Family

Diameters / Packaging

Diameters
 50 lb Bag
Flux ED022412,ED030841

Lincolnweld® 960®

Submerged Arc Welding (SAW)

General purpose neutral welding flux recommended for many automatic and semiautomatic applications

Diameter

Select Diameter

  • Flux

Package

Select Package

  • 50 lb Bag
Buy Now

DETAILS

Features

  • Low cost, general purpose flux designed to weld butt joints and both single and multiple pass fillets
  • Recommended for automatic and semiautomatic submerged arc welding
  • A versatile, cost-effective flux that can be used with many alloy systems
  • Can be used on weathering steels when combined with Lincolnweld® LA-75
  • Actual (Type 3.1) certificates for each lot of flux showing chemical composition, particle size and moisture level are available in the certificate center of lincolnelectric.com
  • Mild Steel Lincolnweld® L-50®, L-61®, LA-71 Low Alloy Steel Lincolnweld® LA-75, LA-85, LA-93, LA-100

Typical Applications

  • Single and multiple pass welding
  • Fillet and butt welds with unlimited plate thickness
  • Can weld steel with heavy scale or rust when used with Lincolnweld® L-50® wire

Special Features

  • Basicity Index: 1.1 Density: 1.4 g/cm

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

NA-5 Control

NA-5 Control

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

LT-7 Tractor (Track Model)

K395-1
Submerged Arc Wire

Lincolnweld® LA-75

ED011062
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Wire Classification Postweld Heat Treatment Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F)
Lincolnweld® L-50® F7A2-EM13K-H4 As-welded 410 (59) 510 (74) 32 47 (35)
Lincolnweld® L-56® F7A2-EH11K-H4 As-welded 480 (69) 590 (86) 29 42 (31)
Lincolnweld® L-61® F6P4-EM12K 1 hour @ 620°C (1150°F) 340 (49) 460 (67) 35 140 (103)
Lincolnweld® L-61® F7A2-EM12K-H8 As-welded 410 (59) 500 (72) 31 152 (112)
Lincolnweld® LA-100 F10A4-EM2-G-H4 As-welded 650 (94) 720 (105) 23 50 (37)
Lincolnweld® LA-71 F7A2-EM14K-H4 As-welded 460 (67) 570 (82) 29 68 (50)
Lincolnweld® LA-71 F7P2-EM14K-H4 1 hour @ 620°C (1150°F) 410 (60) 540 (79) 30 94 (69)
Lincolnweld® LA-75 F7P6-ENi1K-Ni1-H4 1 hour @ 620°C (1150°F) 440 (64) 560 (81) 29 56 (41)
Lincolnweld® LA-75 F8A2-ENi1K-Ni1-H4 As-welded 480 (70) 580 (84) 25 81 (60)
Lincolnweld® LA-85 (LNS 165) F7P5-ENi5-G-H4 1 hour @ 620°C (1150°F) 470 (68) 570 (83) 27 58 (43)
Lincolnweld® LA-85 (LNS 165) F8A2-ENi5-G-H4 As-welded 500 (72) 590 (86) 26 68 (50)
Lincolnweld® LA-93 (LNS 151) F9P0-EB3-G-H8 1 hour @ 690°C (1275°F) 540 (79) 650 (94) 23

DEPOSIT COMPOSITION

Wire Classification %Ti %C %Cr %Cu %Mn %Mo %Ni %P %S %Si %Ti+V+Zr Diffusible Hydrogen
mL/100g Weld Metal
Lincolnweld® L-50® F7A2-EM13K-H4 0.06 0.09 1.48 0.016 0.008 0.58 4
Lincolnweld® L-56® F7A2-EH11K-H4 0.05 0.11 1.86 0.016 0.006 0.96 4
Lincolnweld® L-61® F6P4-EM12K 0.05 0.10 1.30 0.021 0.004 0.38
Lincolnweld® L-61® F7A2-EM12K-H8 0.05 0.06 1.27 0.015 0.009 0.42 5
Lincolnweld® LA-100 F10A4-EM2-G-H4 0.04 0.05 0.03 0.14 1.63 0.44 1.96 0.008 0.004 0.45 0.04 3
Lincolnweld® LA-71 F7A2-EM14K-H4 0.02 0.06 0.15 1.58 0.015 0.010 0.69 4
Lincolnweld® LA-71 F7P2-EM14K-H4 0.02 0.07 0.15 1.58 0.015 0.010 0.69 4
Lincolnweld® LA-75 F7P6-ENi1K-Ni1-H4 0.04 0.04 0.11 1.57 0.01 0.85 0.014 0.009 0.73 0.01 3
Lincolnweld® LA-75 F8A2-ENi1K-Ni1-H4 0.05 0.04 0.11 1.54 0.01 0.84 0.014 0.010 0.71 0.01 3
Lincolnweld® LA-85 (LNS 165) F7P5-ENi5-G-H4 0.05 0.03 0.09 1.61 0.22 0.85 0.016 0.010 0.42 4
Lincolnweld® LA-85 (LNS 165) F8A2-ENi5-G-H4 0.05 0.03 0.08 1.62 0.23 0.85 0.016 0.010 0.42 4
Lincolnweld® LA-93 (LNS 151) F9P0-EB3-G-H8 0.05 2.10 0.08 1.17 0.94 0.014 0.007 0.32 3

FLUX COMPOSITION

Classification %Al2O3 %CaF2 %CaO %MgO %MnO %Na2O %SiO2 %TiO2 %Metal Alloys
Typical Result 29 11 1 22 10 2 21 1 3