Menu Close
SuperGlaze Aluminum MIG Wire Family

Diameters / Packaging

Diameters
 (20) 1 lb Spool
 16 lb Spool
 20 lb Spool
 300 lb Gem-Pak® Box
0.030 in (0.8 mm) ED030307
0.035 in (0.9 mm) ED030308 ED028395 ED036609
1/16 in (1.6 mm) ED030281 ED036611
3/64 in (1.2 mm) ED030310 ED029234 ED036610

SuperGlaze® 4043

MIG (GMAW)

CLASSIFICATIONS:
AWS A5.10 : ER4043

SuperGlaze® 4043 is commonly used to weld on 6XXX base materials and other heat treatable alloys

Diameter

Select Diameter

  • 0.030 in (0.8 mm)
  • 0.035 in (0.9 mm)
  • 1/16 in (1.6 mm)
  • 3/64 in (1.2 mm)

Package

Select Package

  • (20) 1 lb Spool
  • 16 lb Spool
  • 20 lb Spool
  • 300 lb Gem-Pak® Box
Buy Now

DETAILS

SuperGlaze® 4043 Aluminum Silicon alloy is very commonly used to weld on 6XXX base materials and other heat treatable alloys. SuperGlaze® 4043 is a soft alloy, with good crack resistance and high penetration compared to other filler metals. It can be used for certain brazing applications and to weld on high silicon casts like A356. Welding of 5XXX base materials with 4043 and other 4XXX filler metals should be avoided.

Features

  • Designed for welding heat-treatable base alloys and more specifically the 6XXX series alloys
  • Lower melting point and more fluidity than the 5XXX series filler alloys
  • Low sensitivity to weld cracking with the 6XXX series base alloys

Typical Applications

  • For welding 6XXX alloys and most casting alloys
  • General fabrication
  • Automotive components
  • Bicycle frames

Welding Positions

  • All except vertical down

Shielding Gas

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Special Features

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
Magnum 200 MIG Gun

Magnum® 200 Welding Guns

K497-21
Image not found

Magnum® Contact Tip - Standard, .035 in (0.9 mm) - 10/pack

KP14-35
Drive Roll Kit, Aluminum Wire

Drive Roll Kit .035 in (0.9 mm) Aluminum Wire

KP1507-035A
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER4043

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cu %Fe %Mn %Si %Ti
ER4043 Requirement 0.0003 max. 0.05 max. 0.10 max. 0.30 max. 0.8 max. 0.05 max. 4.5 - 6.0 0.20 max.
Typical Result 0.0000 0.01 0.00 0.03 0.1 0.00 5.1 0.02

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH) 		Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 14.9 (585) 23.3 170
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 8.9 (350) 25.2 195
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 6.4 (250) 24.0 240