Menu Close
LINCOLN ER70S-2 Cut Length TIG Electrode

Diameters / Packaging

Diameters
 10 lb Carton
1/8 in (3.2 mm) ED031110
1/16 in (1.6 mm) ED031108
3/32 in (2.4 mm) ED031109

SuperGlaze® 5356

TIG (GTAW)

CLASSIFICATIONS:
AWS A5.10 : R5356

SuperGlaze® 5356 is very commonly used for higher strength welding of 5XXX and 6XXX base materials

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Package

Select Package

  • 10 lb Carton
Buy Now

DETAILS

SuperGlaze® 5356 Aluminum Magnesium filler rod is very commonly used for higher strength welding of 5XXX and 6XXX base materials. Its higher columnar strength offers improved feeding.

Features

  • Excellent for color matching after anodizing
  • General purpose filler alloy for 5XXX and 6XXX series alloys
  • Most widely used aluminum-magnesium welding alloy
  • High strength filler metal
  • Alloy embossed on each rod for easy identification

Welding Positions

  • All

Shielding Gas

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Special Features

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

LINCOLN ER70S-2 Cut Length TIG Electrode

SuperGlaze® 4043

ED031113
LINCOLN ER70S-2 Cut Length TIG Electrode

SuperGlaze® 5356

ED031109
LINCOLN ER70S-2 Cut Length TIG Electrode

SuperGlaze® 5356

ED031110
LINCOLN ER70S-2 Cut Length TIG Electrode

SuperGlaze® 4043

ED031111
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5356

WIRE COMPOSITION

Classification %Be %Cr %Cu %Fe %Mg %Mn %Si %Ti %Zn
ER5356 Requirement 0.0003 max. 0.05 - 0.20 0.10 max. 0.40 max. 4.5 - 5.5 0.05 - 0.20 0.25 max. 0.06 - 0.20 0.10 max.
Typical Result 0.0002 max. 0.12 0.00 0.11 4.9 0.12 0.06 0.10 0.01