Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 1/8 in (3.2 mm) | TG276125638 |
| 1/16 in (1.6 mm) | TG276062638 |
| 3/32 in (2.4 mm) | TG276093638 |
| 5/32 in (4.0 mm) | TG276156638 |
DETAILS
TECHALLOY® 276 is ideal for welding materials of similar composition due to high molybdenum content, this alloy offers excellent resistance to stress corrosion cracking, pitting and crevice corrosion. Can also be used for dissimilar welding between nickel base alloys and stainless steels for cladding operations.
Features
- Used for welding materials of similar composition
- Due to high molybdenum content, this alloy offers excellent resistance to stress corrosion cracking, pitting and crevice corrosion
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- Low carbon, nickel-chromium-molybdenum filler metal can also be used for dissimilar welding between nickel base alloys and stainless steels for cladding
- Used in LNG applications
- Maintenance and Repair
Welding Positions
- All
Shielding Gas
- TIG 100% Argon
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCrMo-4 |
| CWB | AWS A5.14 | ERNiCrMo-4 |
WIRE COMPOSITION
| Classification | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCrMo-4 Requirement | 0.02 max. | 2.5 max. | 14.5 - 16.5 | 0.50 max. | 4.0 - 7.0 | 1.0 max. | 15.0 - 17.0 | Remainder | 0.04 max. | 0.03 max. | 0.08 max. | 0.35 max. | 3.0 - 4.5 |
| Typical Result | 0.01 max. | 0.0 max. | 15.5-15.8 | 0.01-0.09 | 5.5-5.8 | 0.5 | 15.5-16.1 | 58-59 | 0.01 max. | 0.003 max. | 0.01-0.03 | 0.00 max. | 3.6-4.2 |